Product overview
The two-way system features an AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, and 0dB for an A-pillar installation without additional grilles between the tweeter and the listener. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
Key features
- AP 1 tweeter with 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.
- AP 1 tweeter with an acoustic lens designed to compensate for and fine-tune the in-car frequency response anomalies in the 10kHz – 13kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.
- APCX TW very compact tweeter passive crossover optimized for OEM Integration featuring an attenuation switch (0 dB, +2dB) to tune the in-car response according to different installation conditions.
- Passive crossovers are supplied with fast-on connectors that conform to OEM integration. The ends, different in each of the two poles, eliminate any possible connection errors and speed up the required installation time.
- AP 6.5 woofer with 32 mm pure copper voice coil, for high power handling and outstanding low-frequency control.
- AP 6.5 woofer with a water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel Scan Vibrometer.
- AP 6.5 woofer with reduced mounting depth, providing ease of installation in OEM placements.
- AP 6.5 woofer with TPU (thermoplastic polyurethane) edge, featuring the unique “triple wave” profile for maximum linearity of excursion.
Technical specifications
| Technical Specs LF | |
|---|---|
| Woofer Size | 165 mm (6.5 in) |
| Impedance | 4 Ohm |
| Power Handling – Peak | 300 W |
| Power Handling – Continuous | 100 W |
| Frequency Response | 60 ÷ 20k |
| Voice Coil Diameter | 32 mm (1.26 in) |
| Magnet Size | 85 x 40 x 15 |
| Crossover Level Adjustment | +2; 0 |
| Technical Specs HF | |
| Tweeter Size | 26 mm (1 in) |
| Voice Coil Diameter | 20 mm (1.26 in) |
| Electric-acoustic Specs LF | |
| Re | 3.1 Ohm |
| Fs | 80 Hz |
| Mms | 12 g |
| Cms | 0.31 |
| BL | 4.7 |
| Qms | 4.7 |
| Qts | 0.7 |
| Vas | 7.6 l |
| Le | 0.23 mH |
| Spl | 93.5 dB |
| Xmax | 2.5 mm (0.1 in) |
| Kit Tech Data | |
| Crossover Hi-Pass | HP @ 3,5 kHz – 6 dB Oct |
| Cone Diameter | 129 mm |
| General | |
| Weight Woofer | 0.78 kg |
| Weight Tweeter | 0.04 kg |
What you are ordering
The exact Audison model shown above, SKU 69051050. Check the vehicle and system requirements before ordering OEM-fit or integration accessories.
Technical information verified against the official Audison product page.
