Product overview
Two way system features AP 1 tweeter and AP 5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
Key features
- AP1 tweeter with 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.
- AP 1 tweeter with acoustic lens designed to compensate for and fine tune the in-car frequency response anomalies in the 10kHz-13kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.
- APCX TW very compact tweeter passive crossover optimized for OEM Integration featuring an attenuation switch (0 dB, +2dB) to tune the in-car response according to different installation conditions.
- Passive crossovers are supplied with OEM Integration compliant fast-on connectors. The ends, different in each of the two poles, eliminate any possible connection errors and speed up the required installation time.
- AP 5 woofer with 32 mm pure copper voice coil, for high power handling and outstanding low frequency control.
- AP 5 woofer with water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel R&D Scan Vibrometer.
- AP5 woofer with reduced mounting depth, providing ease of installation in OEM placements.
- AP5 woofer with TPU (Thermoplastic Polyurethane) surround, featuring the exclusive shallow Triple Wave profile, for maximum excursion linearity.
Technical specifications
| Technical Specs LF | |
|---|---|
| Woofer Size | 130 mm (5 in) |
| Impedance | 4 Ohm |
| Power Handling – Peak | 225 W |
| Power Handling – Continuous | 75 W |
| Frequency Response | 70 ÷ 20k |
| Voice Coil Diameter | 32 mm (1.26 in) |
| Magnet Size | 85 x 40 x 13 |
| Crossover Type | HP @ 3,5 kHz – 6 dB Oct |
| Crossover Level Adjustment | +2; 0 |
| Technical Specs HF | |
| Tweeter Size | 26 mm (1 in) |
| Voice Coil Diameter | 20 mm (1.26 in) |
| Electric-acoustic Specs LF | |
| Re | 3.1 Ohm |
| Fs | 90 Hz |
| Mms | 9 g |
| Cms | 0.34 |
| BL | 4.6 |
| Qms | 8 |
| Qts | 0.68 |
| Vas | 4 l |
| Le | 0.25 mH |
| Spl | 93 dB |
| Xmax | 2 mm (0.08 in) |
| Kit Tech Data | |
| Cone Diameter | 107 mm |
| General | |
| Weight Woofer | 0.65 kg |
| Weight Tweeter | 0.04 kg |
What you are ordering
The exact Audison model shown above, SKU 69051040. Check the vehicle and system requirements before ordering OEM-fit or integration accessories.
Technical information verified against the official Audison product page.
